Pipe Wrap
In stock
$0.00
This incentive is for the pipe insulation in existing buildings using SEMCO ENERGY Gas Company natural gas as the primary fuel source.
You have a saved application!
You can either continue where you left off or start over. Starting a new application will delete your saved progress.
Required Documentation:
• Proof of Existing Conditions: Photographs or documentation showing the current uninsulated state of the piping.
• Project Details: Detailed description or invoice of the insulation project, including the type of insulation used, total linear feet, and confirmation of R-4 minimum insulation requirement.
• Verification of Fuel Source: Documentation confirming that the building’s space heating and domestic hot water are generated by natural gas-fired equipment
Important Consideration:
• The bare pipe size must be ½ inch to 2½ inch nominal pipe diameter. For piping of 3 inch or more nominal pipe diameter apply in the custom section at the bottom of this application.
• Applicability: Eligible for retrofit projects only.
• Qualifying Efficiency Requirement:
• Projects must use natural gas as the primary fuel source for space heating and/or domestic hot water production.
• A minimum of R-4 (approximately 1 inch) of insulation is required to be added to existing bare metal piping systems.
• The project must involve the insulation of a minimum of 10 linear feet and a maximum of 500 linear feet of piping.
• Acceptable insulation materials include high-density fiberglass insulation or closed-cell elastomeric foam insulation, specifically shaped for piping applications.
• Exclusions:
- Projects utilizing dual-fuel systems or where natural gas serves as a backup or redundant fuel source.
- New construction projects.
- Pipes that are already partially insulated (more than R-0).
- Projects in non-conditioned spaces.
- Newly installed or recently repaired piping systems
• Other requirements:
- Insulation must be installed in conditioned spaces that are heated during the winter using natural gas.
- The domestic hot water and/or space heating for the building must be generated by natural gas-fired equipment, such as boilers or hot water heaters.